This is the Tamiya kit with all the parts added and unpainted. 
D-11/12/13 engine plug with no wiring or bracing added. The plug can be used on the DML/Dragon/Testor/etc. kits also.
D-9, 11, 12, 13 wheel well insert for Tamiya kit..  The same kind of cutout can be done on the DML/Dragon/Testors/etc wheel well part so that an engine plug can be used.
Engine plug with some braces and plumbing added.  The
modeler can add as much plumbing as he wants.
Center wing correction part.  This is just one possible appearance of the centerwing on the D-9.  Since the D-9 wing was derived from the A-8 configuration it is the most likely appearance.  A "V" shape can be seen in some photos. One thing for sure, it is not what the Tamiya kit has since there need to be two  ejection ports for shells.  The new issue of the Tamiya kit (JV44 markings) has the correct configuration.
D-9 engine plug with no plumbing or braces added..
This is the DML wheel well insert with appropriate.cutout made to use with engine plug.
This is what the DML/Dragon/Testors/etc. kit looks like after making the cutout on the kit part and using a PRP engine plug.
Back to Start page
D-9 engine plug.   Can be used on Tamiya
or DML type kits.